Sensory Science SV294 User Manual Download

Page: 11 / 66

Identification of Controls

POWER

Turns the DVD RVCR on and off.
Lock/Unlock the front panel and Remote control
by pressing and holding it over 5 seconds.

Cassette Compartment (VCR deck)

Insert a video cassette here.

EJECT (VCR)

Ejects the tape in the VCR deck.

Disc Tray (DVD deck)

Insert a disc here.

EJECT (DVD)

Opens or closes the disc tray.

ONE TOUCH COPY

Copies from DVD to VCR (or from VCR to DVD).

PLAY/PAUSE

Starts playback of a disc or tape. Pauses playback
or recording temporarily.

STOP

Stops playback.

(

REW

DVD: Skips to previous chapter.
VCR: Rewinds the tape during Stop mode. Press
during Play mode for fast reverse picture search.

)

DVD: Skips to next chapter.
VCR: Advances the tape during Stop mode. Press
during Play mode for fast forward picture search.

DVD/VCR

Toggles control between the DVD deck and the
VCR deck.

Front Panel Display

Shows the current status of the DVD
RVCR.

†

…

Scans up or down through memorized channels.
Also moves up and down in DVD navigation
menus.

REC

Starts recording. Press repeatedly to set the
recording time. Lights red when the DVD
RVCR is recording.

LINE 1 (VIDEO, L-AUDIO-R)

Connects to the audio/video output of an external
source (VCR, Camcorder, etc.).

&*() 1

Front Panel

DF-L72G1N-LS(GB) 04.7.1 3:21 AM 페이지10

Summary of Contents for SV294



































































Search results

Summary of Contents for SV294

Reviews:

Related manuals for SV294

Brands by name

Popular brands

Sensory Science SV294, User Manual

Search results

Summary of Contents for SV294

Reviews:

Related manuals for SV294

Brands by name

Popular brands