SensorTherm METIS Vision MV09, Assembly And Installation Instructions Manual, Page: 31 / 36

Return :
Type
Integer
function CameraCalc_GetExposureTime(index: integer): integer
Calculates the ExposureTime to adjust on the camera depending on the given table.
Please make sure that this index exists otherwise the result given back will be 0.
Transferred
Type
integer
Return :
Typ
Integer
Please note that in this function in the case of an error a 0 is shown this is contrary
to other
function CameraCalc_SelectExposureTable(index: integer): integer
Activates the table for temperature calculation and temperature range scan (see
CameraCalc_GetExposureTempRange).
Transferred
Type
integer
Return :
Typ
Integer
METIS Vision MV09 Rugged Thermovision Camera
Installation and commissioning
Term Description
0 Number of loaded ExposureTime objects
function CameraCalc_GetExposureTime(index: integer): integer
Calculates the ExposureTime to adjust on the camera depending on the given table.
Please make sure that this index exists otherwise the result given back will be 0.
Transferred Parameter:
Term Description
index Index of table to get the ExposureTime to be
adjusted on the camera. Has to be smaller
than calculated with ~
Value Beschreibung
0 Error, table does not exist or is not valid
<>0 Time to adjust on camera, shown in µs
Please note that in this function in the case of an error a 0 is shown this is contrary
to other functions. This is depending on the type of the result.
function CameraCalc_SelectExposureTable(index: integer): integer
Activates the table for temperature calculation and temperature range scan (see
CameraCalc_GetExposureTempRange).
Transferred Parameter:
Term Description
index
Index of table to get the ExposureTime to be
adjusted on the camera. Has to be smaller
than calculated with ~CountExposureTimes.
Value Description
0 No error
Rugged Thermovision Camera
Installation and commissioning
31
Number of loaded ExposureTime objects
function CameraCalc_GetExposureTime(index: integer): integer
Calculates the ExposureTime to adjust on the camera depending on the given table.
Please make sure that this index exists otherwise the result given back will be 0.
Index of table to get the ExposureTime to be
adjusted on the camera. Has to be smaller
than calculated with ~CountExposureTimes.
Error, table does not exist or is not valid
Time to adjust on camera, shown in µs
Please note that in this function in the case of an error a 0 is shown this is contrary
functions. This is depending on the type of the result.
function CameraCalc_SelectExposureTable(index: integer): integer
Activates the table for temperature calculation and temperature range scan (see
Index of table to get the ExposureTime to be
adjusted on the camera. Has to be smaller
than calculated with ~CountExposureTimes.