METIS Vision MV09 Rugged Thermovision Camera
Installation and commissioni
20
6.3 Storage
Storage of packages
Only store packages under the following conditions:
7
Installation and commissioning
7.1 Safety instructions for installation and commissioning
Rugged Thermovision Camera
Installation and commissioning
dispose of packaging.
Packaging materials are valuable raw materials and in
many cases they can be reused, or the
effectively treated and recycled. Improper disposal of
packaging materials causes environmental hazards.
Only store packages under the following conditions:
Do not store outdoors.
Store in a dry and dust-free location.
Do not expose packages to aggressive media.
Protect the packages from direct sunlight.
Avoid mechanical vibration.
Storage temperature: -20 – 53°C
Relative humidity: Max. 60%.
and commissioning
instructions for installation and commissioning
NOTICE!
Damage to the camera due to excessive
temperatures!
-
Maintain sufficient distance to the measurement
object and check temperature at the place of action
prior to mounting and after commissioning
(
Chapter
3.5 “
Optical Data
” on page
For temperatures in excess of 45°C use a cooling plate or
a cooling jacket for shielding (
Chapter
on page 18).
Measurement inaccuracies due to vibrations,
disturbing objects, and intermediate media!
If the Thermovision Camera is exposed to high vibrations
or if disturbing objects or intermediate media (e.g.
windows, smoke, dust, steam) are located between the
Thermovision Camera and measurement object incorrect
measurements can result.
Comply with the mounting instructions (
“Mechanical installation
” on p
age 21
Packaging materials are valuable raw materials and in
many cases they can be reused, or they can be
effectively treated and recycled. Improper disposal of
packaging materials causes environmental hazards.
Only store packages under the following conditions:
Do not expose packages to aggressive media.
Damage to the camera due to excessive
Maintain sufficient distance to the measurement
object and check temperature at the place of action
prior to mounting and after commissioning
” on page 12
).
For temperatures in excess of 45°C use a cooling plate or
Chapter 5.3 ‘Accessories’
Measurement inaccuracies due to vibrations,
disturbing objects, and intermediate media!
is exposed to high vibrations
or if disturbing objects or intermediate media (e.g.
windows, smoke, dust, steam) are located between the
and measurement object incorrect
mounting instructions (
Chapter 7.2
21).
