05/2019
- 3 -
Copyright © 2019, Fast ČR, a.s.
■
When filling the kettle, make sure that the water level covers at least the minimum
mark and also that it does not go over the maximum mark.
■
Do not wash the kettle or its base under running water and do not submerge it or
its base in water or another liquid.
■
Before connecting the kettle to a power socket check that the nominal voltage
matches the electrical voltage in the socket.
■
Connect the kettle only to a properly grounded socket.
■
Do not place the kettle on window sills, kitchen sink drainboards or unstable
surfaces. Always place it on a stable, even and dry surface.
■
Do not place the kettle on equipment or devices that are sources of heat.
■
Never use the kettle in the near vicinity of a bath, shower or swimming pool.
■
Use the kettle exclusively for boiling drinking water. Do not use it to heat other
liquids or foodstuffs.
■
Always take the kettle off the base before filling it.
■
Check that the lid is securely closed before starting the kettle. Do not open the lid
or handle it in any way while the water is boiling.
■
Use the handle for lifting and carrying the kettle.
■
Be especially careful when pouring water out of the kettle to avoid scalding by the
boiling water or steam.
■
Always disconnect the kettle from the power socket when leaving it without
supervision, when not using it and before moving or cleaning it.
■
Clean it according to the instructions in chapter Cleaning and maintenance.
■
Disconnect the kettle from the power socket by pulling on the plug, never pulling
on the power cord. Otherwise, this could damage the power cord or the socket.
■
To avoid the danger of injury by electrical shock, do not repair the kettle yourself
or make any adjustments to it. Have all repairs or adjustments performed at an
authorised service centre. By tampering with the appliance, you risk voiding your
legal rights arising from unsatisfactory performance or quality warranty.
