Electric Food Slicer
SFS 4050SS
EN
EN-7
2015
09/2015
Note
:
If food gets stuck to the cutting disc A
5
, stop slicing and clean the cutting disc A
5
using a plastic
spatula. Before cleaning the food slicer, turn it off and disconnect it from the power socket.
We recommend that you wet the cutting disc A
5
before cutting cheese.
Some food may cause discolouration of plastics. However, this does not have any effect on the
functionality of the food slicer.
5) Turn the food slicer off using the power switch A
4
.
6) Before taking away slices or remains of sliced food, ensure that the cutting disc A
5
has come to
a complete stop.
7) After finishing using the appliance, disconnect it from the power socket.
CLEANING AND MAINTENANCE
•
Before cleaning the appliance, always turn it off and disconnect it from the power socket. Using the
thickness adjustment dial A
3
, set the plate to position 0 mm.
•
After each use remove any food remains from the food slicer. Clean parts that come into contact
with food using a wiping cloth dipped in clean water and then dry with a wiping cloth.
•
For a more thorough clean, disassemble the food pusher A
2
, the sliding plate A
7
and the cutting
disc A
5
. Clean these parts using warm water and kitchen detergent. Then thoroughly rinse under
flowing water and dry them.
Note
:
Remove the cutting disc A
5
by turning the central fastener A
6
clockwise and take it off the
drive unit.
Attention:
Pay extra attention when handling the cutting disc A
5
. To avoid injury, do not touch the blade.
•
Before using again, assemble the appliance according to the instructions in chapter Assembling the
electric food slicer.
•
Wipe the outer surface of the drive unit and the base plate using a dry wiping cloth.
•
For cleaning do not use thinners, solvents or cleaning agents that cause abrasion.
STORAGE
•
When not using the appliance, store it in a dry place out of children's reach.
