Coffeemaker
SCE 3050SS / SCE 3051RD
EN
EN-5
Revision
05/2016
Copyright © 2016, Fast ČR, a.s.
• The surface of the coffeemaker and its hotplate remain hot
for a certain time after it is turned off . Avoid contact with hot
surfaces . Allow the appliance to fully cool down before moving
or cleaning it . Do not move the appliance with the kettle placed
on the hotplate .
• Do not clean the appliance (excluding the glass kettle,
permanent filter and filter holder) under running water or
submerge it under water .
• Do not place the appliance on or near an electric or gas stove
or other sources of heat .
• To prevent the appliance from falling, locate the power cord so
that it does not hang over the edge of a table .
• Ensure that the power cord does not come into contact with
water or moisture or a heated surface .
• Do not disconnect the appliance from the power socket by
pulling on the power cord . This could damage the power cord
or the power socket . Disconnect the cord from the power
socket by gently pulling the plug of the power cord .
• If the power cord is damaged, have it replaced at a professional
service centre . It is forbidden to use the appliance if it has
a damaged power cord or plug .
• To avoid the danger of injury by electrical shock, do not repair
the appliance yourself or make any adjustments to it . Have
all repairs or adjustments of the appliance performed at an
authorised service centre . By tampering with the appliance,
you risk voiding your legal rights arising from unsatisfactory
performance or quality warranty .
