Sensor HD-PTZx35, Operation Manual

Page: 27 / 32

27
Optional Auxiliary Lights
PN: 164010 & 164020
1. To use the auxiliary lighting module, the covers to the
electrical connection must first be removed.
2. Using the 2.5mm hex tool, remove the two flat head screws
and the cover to expose the connection. Set aside in a
clean, safe place.
3. Align the connector on the module with the connector on the
camera housing with the light window facing forward. Align
the guide pins and press the two together.
4. Using the M4 socket head screws and lock washers, tighten
the light to the camera head.
5. Power the camera on and test that the light module
illuminates with the center switch on the controller.