Sensocar SC-A1, Complete User'S Manual, Page: 21 / 27

- 21 -
this is done by pressing the FUN key until the unit enters edit mode and the display flashes
0.
At this point the number of pieces corresponding to the weighed pieces sample is entered.
To do this, use the T key to increase the value of the flashing digit, the B key to change
digit, the FUN key to cancel editing and leave without saving, and the INTRO key to validate
and save the piece value entered. The unit will very briefly display the calculated unit weight
value.
It will then return to piece counter mode, displaying as of this moment the number of pieces
corresponding to the weight measured in accordance with the unit weight calculated.