Senso AK30, Instruction Manual, Page: 28 / 31

Manual ver 2.0 28
Automatic calibration of the pressure transducer
Tare activation/deactivacion
4.12 Parameter protection
By assigning a value other than 0 to the
PASS
parameter, the
menu block is activated. If the
LEUEL
level is assigned to 0 the points of the
consignment can be modified. If
LEUEL
is assigned to
1, they are all
blocked. Once the block is activated, it is necessary to enter the
assigned key in the
pASS
parameter to be able to access the menus.
Normal operation
mode
tAr.On
Utilisable in AK30 set up with extensiometric gauge input (
INP
= 14 )
tAr.Of
For 3 seconds
For 3 with tare activate
Normal operation
mode
Zero
PASS?
*1
For 3 seconds
----
SpAn
----
SAUE
done
FAiL
If readings incorrect
Only utilisable in AK32 or AK30 set up with pressure input (
INP
= 13 )