Senso AK30, Instruction Manual, Page: 19 / 31

Manual ver 2.0 19
4.9 Límites de los parámetros configurables
SP.A1 Alarm consignment point 1
Minimum value:
Probe selected Value
Thermocouple Minimum probe value
Thermoresistance Minimum probe value
Linear input( V o mA ) in.L parameter
Pressure transducer -10% scale base
Extensiometric gauge (AK30) 0
Maximum value:
Probe selected Valor
Thermocouple Maximum probe value
Thermoresistance Maximum probe value
Linear input( V o mA ) in.H parameter
Pressure transducer FSV
Extensiometric gauge(AK30) FSV
SP.A2 Alarm consignment point 2
Minimum value:
Probe selected Value
Thermocouple Minimum probe value
Thermorresistance Minimum probe value
Linear input( V o mA ) in.L parameter
Pressure transducer -10% scale base
Extensiometric gauge(AK30) 0
Maximum value:
Probe selected Value
Thermocouple Maximum probe value
Thermorresistance Maximum probe value
Linear input( V o mA ) in.H parameter
Pressure transducer FSV
Extensiometric gauge(AK30) FSV
C.A1 Alarm configuration 1
Minimum value: 0
Maximum value: 4
C.A2 Alarm configuration 2
Minimum value: 0
Maximum value: 4
Hy.A1 Alarm hysteresis 1(only visible if C.A1 ≠ 0 )
Minimum value: 0
Maximum
value:
If alarm configured low SP.A1 – Probe Low Limit
If alarm configured high Probe High Limit – SP.A1
Hy.A2
Alarm hysteresis 1(only visible if C.A2 ≠ 0 )
Minimum value: 0
Maximum
value:
If alarm configured low SP.A1 – Probe Low Limit
If alarm configured high Probe High Limit – SP.A1