MT4299E Rev.1
15/10/2019
Pagina 54 di 55
Fig. 4.8.4 b)
Screen with channel in “Test”
The channels remain in TEST mode until the Channel Maintenance Time set by the
Configuration software (10-60 minutes) is expired.
The EXIT TEST option takes out of the Test/Maintenance mode the selected channel
In the Channel list (fig. 4.8.4) screen, moving up and down with the arrow keys through
the Detectors list, choose 1 and press ENTER to get into the detector’s details screen.
This screen is the same for “Operator” and “Maintenance” level, allowing only viewing
the Detector configuration details.
Fig. 4.8.4 c)
Detector details screen in “Engineer“ level
Unlike the above, this screen seen as “Engineer” level, allows changing the Detector’s
details. See chapter 5-PC Configuration for more details.
