16
OPERATION AND USE
⚠
CAUTION: Always start any SENSIT® GOLD G2 in a gas free
environment to ensure a proper zero.
1.
Push the POWER/MUTE BUTTON (A) until the instrument beeps and the
display illuminates. Each of the following will be displayed:
a. Sensit Technologies Logo
b. System check that includes:
i. LED check
ii. Backlight check
iii. Memory check
iv. Pump check
v. Battery check
vi. Microprocessor check
vii. Pressure sensor check
viii. Clock check
ix. Auto Log Check (alert at 50 records remaining
before memory is full and overwrites)
c. Display all active sensors
d. Display “SENSIT GOLD G2, Configuration Number and Software revision”.
e. Date and Time
f. Gas Type (indicating type of calibration gas)
g. Serial Number
h. Cal Due (up coming), Last Cal (if activated) or Cal Past Due
i. Sensor Warm Up and Please Wait
j. Autozero (all gases and pressure sensor)
k. Auto Bump Test (optional)
l. Working display showing all gases sensed and battery power remaining