20
POWER:
Select “SOLAR” and “AC” power. If “SOLAR” is selected the unit will try
to charge the batteries whenever power is present. If “AC” is selected the system
will maintain the battery voltage in the middle of its range to extend battery life.
It is very important that “SOLAR” is selected for remote power application.
SAMPLE:
Control the behavior of the auxiliary port. The port is configured to
supply power to a valve to trigger sample collection if the PPB reading exceeds a
predefined threshold for a predefined amount of time.
TIME:
Set the system date and time. If cellular mode is enabled this will happen
automatically when the device connects. Note that the initial data may have the
wrong date and time until the clock adjusts.
EXIT:
Leave the root menu and starts system operation
Detailed Cellular Menu Information
Menu Item
Description
Location
APN
Carrier APN Setting
Cellular Menu
CREDENTIALS
MQTT Username and Password
Cellular Menu
HOST
Server Location Address
Cellular Menu
NETWORK
Cellular Network Configuration
Cellular Menu
PROTOCOL
Data Transfer Protocol
Cellular Menu
RATIO
Number of Samples to Buffer
Cellular Menu
SIGNAL
Apply settings and check signal
Cellular Menu
TLS
Activate TLS, Load Server Cert
Cellular Menu
TOPICS
MQTT Topics
Cellular Menu
EXIT
Exit Cellular Menu
Cellular Menu
APN:
Set the required APN for data access on the installed sim card. Please note
that the APN text entry might be case sensitive
CREDENTIALS:
Set the require USERNAME and PASSWORD require for MQTT
data access.
