Cleaning
1. Unplug and let the appliance cool down before cleaning.
2. Clean the main outer body with a soft damp cloth. DO NOT IMMERSE THE BASE
INTO WATER OR ANY OTHER LIQUID.
3. Wash the lid, paddle, steaming basket and removable cooking pot in hot soapy water,
using a sponge or dishwashing brush do not use a scoring pad as this may damage
the non-stick coating. Rinse and dry thoroughly. The removable parts are not suitable
for dishwasher cleaning.
4. Wipe the internal heating plate with a soft damp cloth and dry thoroughly.
5. Replace the cooking pot back into the unit. Store the unit with the lid loosely on top of
the Multi Cooka to prevent aromas, moulds and odours.
Storage
1. Ensure the appliance and removable parts are completely dry, and the appliance is
switched off and unplugged from the electrical outlet before storage.
2. Store in the original box in a cool, dry place.
3. Store in a safe place, away from children.
22
Troubleshooting
Problem
Reason
Solution
The Multi Cooka will not
operate after the programme
has been selected.
The start button has not been
pressed.
The start button must be
pressed after the selection for
the cooking cycle to begin.
The stirring setting is not
working correctly.
The paddle is not in position.
Make sure it it fitted to the bowl
before adding ingredients.
Turn the bowl left and right until
it makes a good connection
with the stirring mechanism
under the bowl.
E1 is displayed on the screen
Open circuit of the sensor.
Unplug the unit and allow to sit
for 20 minutes.
E2 is displayed on the screen
Short Circuit of the sensor.
Ensure the cooking bowl is cor-
rectly positioned inside; it must
have direct contact with the
heating plate. Wipe the base
with a soft cloth.
E3 is displayed on the screen
The unit has overheated.
The unit has boiled dry.
Switch off and cool down be-
fore continuing.
Make sure there is sufficient
liquid in the unit.
