Sensidyne Gilian Gilibrator STABLFLOW, Operation Manual, Page: 15 / 46

Sensidyne Document No. 360-0213-01 - Rev B © 2018 Sensidyne, LP
Page 9
Gilian Gilibrator ® 3 Dry Cell Calibrator – Operation Manual
SECTION THREE: Set-Up
3.1. System Components
The Gilibrator 3 Dry Cell Calibration System (refer to Figure 3.1) contains a crystal-
controlled microprocessor timing system. This type of microprocessor, used in
conjunction with the built-in software, provides an extremely accurate method for
calculating the flow rate parameters.
The Gilibrator 3 Dry Cell Calibration System contains the following components:
Figure 3.1
A LCD Display
B Status and Notification LED
C Ambient Light Sensor/Charge LED
D SD Card Port
E
On/Off Power Switch
F Power Port
G USB Port
H DB9 Port
I
Cell Release Button
J Viewing Window on Dry Cell
K Inlet
L Outlet