Sensidyne GILAIR-3, Operation & Service Manual

Page: 8 / 30

— PRELIMINARY —
Gilian ®
GILAIR-3 & GILAIR-5 AIR SAMPLING SYSTEMS
8
Sensidyne Document No. 800880M (Rev E)
READ AND UNDERSTAND ALL WARNINGS BEFORE USE
WARNING: Do not use the BMS-200 Battery Charger to charge SIRA approved battery packs.
Read and understand ALL warnings before using this product. Failure to read, understand, and comply with
ALL warnings could result in property damage, severe personal injury, or death.
Read and understand ALL applicable Federal, State, and Local environmental health and safety laws and
regulations, including OSHA. Ensure complete compliance with ALL applicable laws and regulations before
and during use of this product.
UNDER NO CIRCUMSTANCES should this product be used except by qualified, trained, technically
competent personnel and not until the warnings, Operation and Service Manual , labels, and other literature
accompanying this product have been read and understood.
The Operation and Service Manual must be read and understood by each user before operating this product
or using its accessories, in order to ensure proper and safe use and installation of this product and to ensure
familiarity with the proper treatment and safety procedures in the event of an accident.
DO NOT remove, cover, or alter any label or tag on this product, its accessories, or related products.
DO NOT operate this product should it malfunction or require repair. Operation of a malfunctioning product,
or a product requiring repair may result in serious personal injury or death. DO NOT attempt to repair or
modify the instrument, except as specified in the Operation and Service Manual . Contact the Gilian Service
Department to arrange for a Returned Material Authorization (RMA).
Use ONLY genuine Gilian
®
replacement parts when performing any maintenance procedures described in
this manual. Failure to do so may seriously impair instrument performance . Repair or alteration of the product
beyond the scope of these maintenance instructions, or by anyone other than a certified Gilian
®
serviceman,
could cause the product to fail to perform as designed and persons who rely on this product for their safety
could sustain severe personal injury or death.
DO NOT operate in excessive chemical or water vapor atmospheres. Failure to follow instructions may cause
permanent damage to the equipment.
The GilAir-3 and GilAir-5 Air Samplers employ rechargeable Nickel-Cadmium batteries. ALWAYS fully
charge the battery before starting the pump.
DO NOT operate the unit with improperly maintained batteries. This can cause pump failure or faulting.
DO NOT operate the unit with a dirty or blocked inlet filter. This can cause pump failure or faulting.
DO NOT drop, crush, or roughly handle the unit, and NEVER submerge the unit in water. This can cause
pump failure or faulting.
DO NOT run the pump beyond its recommended specifications.
WARNINGS !