INSTALLATION - OVERVIEW
Preparation
Though you may be able to install the Sensiblue yourself, we recommend using a
local certified installer to install it according local regulations. Make sure you keep
enough space around Sensiblue to replace salt container as mentioned in Fig. 1.
Install in a dry, clean, aerated and frost-free environment.
Inside the box:
‣
Sensiblue S315
‣
Bracket to mount Sensiblue S315 to
the wall
‣
Installation manual
‣
Blue Bracket for unmounting salt
container
Needed for installation:
‣
(Flexible) tubing with brass fitting 3/4”
inch male thread.
‣
2 Screws, Diameter 6mm, min. Length
45mm with plugs.
‣
ONLY
use
Teflon tape, for making a
water tight connection
‣
2 Wrenches (for Sensiblue: size 30)
‣
Screwdriver and other tools for installing
tubing.
Typical installations
We advice you to install the Sensiblue
with a by-pass (Figures B & C) and -
when you have a water storage facility to
install the Sensiblue upstream of the tank.
Please be aware that we strongly advice
you to have 2 valves up- & downstream
(marked A & B in figures on the right) of
the Sensiblue, this is needed for
maintenance.
- 3 -
Fig. A - Installation in line
Fig. B - Installation with by-pass
Fig. C - Installation with by-pass and water
storage tank