7
Install your new device
Innoband’s SC00 Sense Commander gateway is designed for dry indoor environment only.
Please follow these steps below to properly set up the unit.
Install the Hardware
1.
Unpack Sense Commander from the package.
2.
Use the supplied Ethernet cable and connect the Commander’s Network port to an
available port on the home network’s Ethernet Router.
3.
Power on the Sense Commander using the supplied power adapter.
4.
Wait about 60 seconds until the flashing red In/Exclusion LED goes off, and the
Power LED is solid green, while the Ethernet LED blinks in green steadily.
Create User Account at Sense Cloud
1.
If applicable, turn on a computer that is wire or wirelessly connected to the same
Ethernet router.
2.
Launch a web browser (such as Internet Explorer, Google Chrome, Apple Safari,
FireFox) on the computer.
3.
In the URL field, enter
www.innobandsense.net
.
4.
On the Sign In page, select Create new account.
5.
Follow the screen instructions, enter the desired email address, password, and
validation code and click ‘Authorize’.
6.
An automated email will be sent to the email address entered earlier.
7.
Retrieve the email (check your SPAM folder if necessary) and click on the validation
link in the email message.
