6
LED Descriptions (TBD)
The table below provides a summary of LED functions. Please refer to applicable user’s
guides on applicable Z-Wave
TM
devices for inclusion and exclusion procedures.
Function
Description
LED & Siren Status
Power
Indicate if the unit is properly
powered
LED: solid green
Ethernet
Indicate if the unit is connected
to an Ethernet network
LED: blinking green
1. Configure the Z-Wave
Controller into inclusion mode.
2. Press the Inclusion button until
In/exclusion LED start to blink
in red.
3. The blinking LED stops if a Z-
Wave sensor is discovered and
paired with the Commander.
Inclusion
4. The inclusion mode times out
in 30 seconds if nothing is
discovered.
LED: blinking red
1. Configure the Z-Wave
Controller into exclusion mode.
2. Press the Exclusion button until
In/exclusion LED start to blink
in red.
3. The blinking LED stops if a Z-
Wave sensor is discovered and
excluded with the Commander.
Exclusion
4. The exclusion mode times out
in 30 seconds if nothing is
discovered.
LED: blinking red
Z-Wave
Indicate if Z-Wave communication
is working properly.
LED: n/a
