Strips MS-H Article #
1302002
Strips MS-WL Article #
1301002
User Manual
User commands
1. Sending open frame
Move the magnet to the rounded edge 3 times (
see 3 green LED blinks at Sensative logo )
1 short blink means the frame was
sent (success)
5 red means there was no
acknowledgment from the gateway
2. Factory reset
To reset the device to the factory settings, move the
magnet to the rounded edge 3 times, and on the 3rd
pass hold the magnet for 10 seconds. One long green
LED blink means reset was successful
7.
