Strips MS-H Article #
1302002
Strips MS-WL Article #
1301002
User Manual
Step 4:
You may add/edit as many configuration and settings as you wish, once you
have finished adding your settings, click the "Summarize and generate payload"
button.
Step 5:
Review the configurations and reports that were edited, remove any if necessary.
Step 6:
Lastly, copy the payload and send the down-link via your server application on
port 11. Strips is a type A device, so an open frame must be sent in order to
receive the down-link, to do this : Move the magnet over the rounded edge 3
time (3 LED blinks)
6.
