10
4.3.3
Mounting the Manual Bypass Switch - 30A Transfer Relay (Open
frame 511016-1 and enclosed case 511016-2)
a)
Locate a secure and appropriate cabinet support shelf.
b)
Using the washers and bolts provided fix the combined manual bypass switch - 30A
transfer relay as shown on Figures 5 below.
FIGURE 5:
CMBPS-30ATR Cabinet rail mounting (511016-1 and 511016-2)
4.3.4 Mounting the Batteries
Warning: Connecting the BBS incorrectly to the battery will cause
damage that is not covered under warranty.
a)
Place two batteries on each shelf next to each other.
b)
Connect the red wire to the positive post of the first battery using one set of the
four-battery quick connector wire set provided.
c)
Connect the black wire to the negative post of the same first battery.
d)
Repeat procedure on the second, third and fourth battery respectively.
e)
Plug the four quick connectors as shown on Figure 6 on page 11.
f)
Finally, plug the main quick Anderson connector and check the tightness of all
connections.
Screws & washers
