![background image](http://html.mh-extra.com/html/sennheiser/xs-wireless-2/xs-wireless-2_instruction-manual_1242322061.webp)
EM-XSW 2 rack receiver
60
Installing receivers in a rack
CAUTION
Rack mounting poses risks
When installing the device in a closed 19" rack or multi-rack
assembly, please consider that, during operation, the ambient
temperature, the mechanical load and the electrical potentials
will be different from those of devices which are not mounted
into a rack.
▷
Make sure that the ambient temperature within the rack
does not exceed the permissible temperature limit stated
in the specifications. See „SPECIFICATIONS“.
▷
Ensure sufficient ventilation; if necessary, provide addi
-
tional ventilation.
▷
Make sure that the mechanical load of the rack is even.
▷
When connecting to the power supply system, observe the
information indicated on the type plate. Avoid overloading
the circuits. If necessary, provide overcurrent protection.
▷
When mounting in a rack, please note that intrinsically
harmless leakage currents of the individual power supply
units may accumulate, thereby exceeding the permissible
limit value. As a remedy, ground the rack via an additional
ground connection.
To mount the receiver in a rack, you will need the GA 1-XSW 2
rack mount kit (see „Accessories“).
Summary of Contents for XS WIRELESS 2
Page 92: ...Establishing a radio link Synchronizing the receiver and transmitter 91 ...
Page 98: ...EM XSW 1 stationary receiver 97 Dimensions Approx 200 x 42 x 127 mm Weight Approx 340 g ...
Page 100: ...EM XSW 1 DUAL rack receiver 99 Dimensions Approx 320 x 42 x 127 mm Weight Approx 610 g ...
Page 102: ...EM XSW 2 stationary receiver 101 Dimensions Approx 200 x 42 x 127 mm Weight Approx 680 g ...