Sennheiser Tourguide 2020-D, Instruction Manual, Page: 52 / 77

Tourguide 2020-D | 125
Operation
Muting the devices
Muting the bodypack transmitter
Slide the MUTE switch 2 to the left, to „ MUTE “�
The red LED LOW BATT / MUTE
7
lights up permanently� The MIC level dis-
play
4
no longer shows any deflection� The bodypack transmitter’s micro-
phone input is muted�
LINE
CH 03
MIC
4
2
3
Note: The muting function ( MUTE ) mutes the microphone input 3 but not the
line input 4 � This function enables a pre-recorded track to be played through
the line input without being disturbed by the tour guide’s microphone� When
the track has finished, the guide can un-mute the microphone and continue
talking�
To deactivate the muting function:
Slide the MUTE switch 2 back to the right�
The red LED LOW BATT / MUTE 7 goes off� The MIC level display
4
and the
LINE level display
5
indicate the current levels�
Muting the radio microphone
Turn the protective cap 6 so that the MUTE switch 12 becomes accessible�
Slide the MUTE switch
12
in the direction of the arrow�
„ MUTE “ appears on the display of the radio microphone� After 5 minutes,
„ CH OFF “ appears on the display (see „Display of the energy saving mode“
on page 89)�
To deactivate the muting function:
Slide the MUTE switch 12 back in order to transmit the audio signal again�
6
12
EN
DE
FR
IT
ES
NL
COMPLIANCE