Adjusting and using the products
SpeechLine
IS microphone series
| 33
Activating/muting microphones
The products shown on the left have LEDs that indicate whether the
microphone is muted or activated. The LEDs light up as soon as the
products are powered via the mixing console, the auto mixer or the DSP.
Whether a microphone is permanently activated or muted or whether it
can be activated or muted by pressing the microphone button depends on
the setting of the slide switch that sets the behavior of the microphone
button (see page 32). When the slide switch is set to
ON
, the microphone
is permanently activated and the microphone button is deactivated.
왘
Press the microphone button, the LED lights up:
* This function is not supported by all mixing consoles, auto mixers and
DSPs.
MZH 30xx
MEG
14-40-L-II
MAS 1
MEB 114-S
MEG 14-40
... green
Microphone is active
... red*
Microphone is muted
The signal light rings of the microphones light up synchronously
with the signal light rings of the microphone buttons.
MEB 114-S
MAT 133-S
MAT 153-S
+ MZH 30xx
+ MEG 14-40
+ MEG 14-40-L-II
MAS 1
