Adjusting and using the products
SpeechLine
IS microphone series
| 31
Adjusting and using the products
Adjusting the microphone sensitivity
왘
Use the mixing console, the auto mixer or the DSP to adjust the
microphone sensitivity so that over- or under-modulation is avoided.
For more information on the audio settings, refer to the instruction
manual of the corresponding device.
Activating/deactivating the low-cut filter on the
MEB 114 (-S)
A table or lectern transfers the sound produced when a speaker
accidentally stumbles against it. The low-cut filter reduces low-frequency
noise by filtering out frequencies below 120 Hz.
왘
Set the slide switch to the desired position:
If interference occurs at high field strengths, remove the source of
interference from the microphone.
MEB 114
MEB 114-S
Low-cut filter is deactivated
Low-cut filter is activated
