background image

IRW-2PA

O W N E R S   M A N U A L

INFRARED WIRELESS 

MICROPHONE PA SYSTEM

NADY SYSTEMS, INC.

6701 Shellmound Street • Emeryville, CA 94608 USA

Tel: 510/652-2411 • Fax: 510/652-5075

www.nady.com

IMPORTANT SAFETY INSTRUCTIONS WARNING

An equilateral triangle enclosing a lightning flash/arrowhead symbol 
is intended to alert the user to the presence of uninsulated 
“dangerous voltage” within the product’s enclosure which may be of 
sufficient magnitude to constitute a risk of electric shock.

An equilateral triangle enclosing an exclamation point is intended to 
alert the user to the presence of important operating and service 
instructions in the literature enclosed with this unit.

ATTENTION

RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR 

When using this electronic device, basic precautions should always be taken, including the 

following:

1.  Read all instructions before using the product.

2.  Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a wet 

basement, or near a swimming pool, etc.).

3.  This product should be used only with a cart or stand that will keep it level and stable and 

prevent wobbling.

4.  This product, in combination with headphones or speakers, may be capable of producing 

sound levels that could cause permanent hearing loss. Do not operate for a long period 

of time at a high volume level or at a level that is uncomfortable. If you experience any 

hearing loss or ringing in the ears, you should consult an audiologist.

5.  The product should be positioned so that proper ventilation is maintained.

6.  The product should be located away from heat sources such as radiators, heat vents, or 

other devices (including amplifiers) that produce heat.

7.  The product should be connected to a power supply only of the type described in the 

operating instructions or as marked on the product. Replace the fuse only with one of the 

specified type, size, and correct rating.

8.  The power supply cord should: (1) be undamaged, (2) never share an outlet or extension 

cord with other devices so that the outlet’s or extension cord’s power rating is exceeded, 

and (3) never be left plugged into the outlet when not being used for a long period of 

time.

9.  Care should be taken so that objects do not fall into, and liquids are not spilled through, 

the enclosure’s openings.

10. The product should be serviced by qualified service personnel if:

A. The power supply cord or the plug has been damaged.

B. Objects have fallen into, or liquid has been spilled onto the product.

C. The product has been exposed to rain.

D. The product does not appear to operate normally or exhibits a marked change in 

performance.

E. The product has been dropped, or the enclosure damaged.

11. Do not attempt to service the product beyond what is described in the user maintenance 

instructions. All other servicing should be referred to qualified service personnel.

This unit is to be installed by qualified personnel only.

Summary of Contents for IRW-2PA









Reviews: