![background image](http://html1.mh-extra.com/html/sennheiser/set-830-s-mke/set-830-s-mke_instruction-manual_1241082033.webp)
29
Additional technical information
Changing the operating mode
The transmitter can be set to a different operating mode. This is useful
when the sound of your sound source is very low and the transmitter
therefore does not always switch on automatically.
Particularities of operating mode 2:
In operating mode 2, the transmitter is
not
switched on by the sound
signal from the sound source.
To
switch
the transmitter
on
:
왘
Take the receiver out of the charging compartment.
To
switch
the transmitter
off
:
왘
Place the receiver into the charging compartment.
If – in operating mode 2 – you want to use a second receiver and charge
its rechargeable battery during operation:
왘
Press the “speech intelligibility” button
for approx. 5 seconds.
The indicator
goes off. The charging indi-
cator for the spare rechargeable battery
flashes several times:
red:
operating mode 2
green:
operating mode 1 (factory-preset)
If the operating mode was changed success-
fully, the charging indicator for the spare
rechargeable battery
goes off and the
lights up again.
왘
Pull the battery out of the receiver’s battery
compartment
6
.
왘
Slide the battery into the transmitter’s
charging compartment
as far as it will go.
D
C
0
6
9
Summary of Contents for Set 830 S-MKE
