Sennheiser Set 830 S-MKE, Instruction Manual, Page: 20 / 42

16
Using the Set 830 S-MKE system
Adjusting the volume
Searching for a sound source
왘
Switch the receiver on.
Do you hear the desired sound source?
Yes: The receiver has already found the sound source.
왘
If you have not yet found your sound source, press the
channel search button once more.
If you still cannot find your sound source:
왘
Read the chapter “If a problem occurs ...” on page 24.
Note:
The channel indicator goes off after 30 seconds so
that the light won’t disturb you in a dark room.
왘
Use the volume control
2
to adjust
the volume to a sufficient and
comfortable level.
No:
왘
Briefly press the channel search
button
5
.
The sound source is searched for.
On the receiver, the channel indi-
cator
1
can light up as follows:
Channel
indicator Frequency
You hear the
sound in
2.3 + 2.8 MHz stereo
2.,3 MHz
mono
2.8 MHz
5
1