![background image](http://html.mh-extra.com/html/sennheiser/rs-2400/rs-2400_instruction-manual_1241036020.webp)
WHAT TO DO IF ...
... the volume is up but you
왘
There is no audio signal available. Check the transmitter
cannot hear anything:
connection. Is the volume at the headphone socket of your
sound source sufficient?
왘
Are you still within the transmitter’s range?
왘
Is the receiver on the same frequency as the transmitter?
... the sound is distorted:
왘
The receiver accupack has gone flat, please
recharge it immediately.
왘
The volume on the receiver is adjusted too high.
Reduce the volume.
... the sound is slightly noisy:
왘
You are about to leave the transmitter’s maximum range.
Soon transmission will be interrupted completely.
왘
The transmitter’s modulation level is too low.
Increase the volume on your sound source.
... you can hear twittering and
왘
Two transmitters are interfering!
chirping, and the sound is “squeezed”:
Choose a different transmission channel.
... the transmitter switches off
왘
The volume on your TV set is adjusted too low. Adjust
during operation:
the volume on the TV set such that the LED on the
transmitter blinks occasionally.
ACCESSORIES
왘
BA 151
Rechargeable accupack as a spare, for use when the supplied
accupack is being recharged.
왘
L 151-2
Charger for recharging two BA 151 accupacks (recommended
when more than two stethoset receivers are used with one
transmitter).
왘
RR 2400-8
Additional stethoset receiver
Summary of Contents for RS 2400
