![background image](http://html.mh-extra.com/html/sennheiser/rs-145-comfort/rs-145-comfort_instruction-manual_1241022017.webp)
Using the RS 145 comfort system
13
If there is no signal from the sound source for more than three
minutes, the transmitter automatically switches off and the
operation indicator
8
goes off. The transmitter is now in
standby mode, its power consumption is very low so that it
can remain connected to the mains.
Switching the headphones on and off
Switching the headphones on
The headphones switch on and automatically start the
channel search on the last selected channel. If a channel is
found, the channel search stops. You hear the signal of the
found sound source.
If you do not hear the sound source after a short while, please
refer to the chapter “If a problem occurs ...” on page 19.
When not using the transmitter for extended periods of
time, pull out the mains connector from the wall socket.
In this case, however, the headphones’ rechargeable
batteries will not be recharged.
CAUTION!
Hearing damage due to high volumes!
Listening at high volume levels for long periods
can lead to permanent hearing defects.
왘
Before putting the headphones on, set the
volume to a low level (see page 16).
왘
Do
not
continuously expose yourself to high
volumes.
왘
Set the ON/OFF switch
5
on the headphones
to the position
ON
.