![background image](http://html1.mh-extra.com/html/sennheiser/pxc-550-ii/pxc-550-ii_instruction-manual_1240993018.webp)
Using the headphones
18 | PXC 550-II
Switching the headphones off
1. Hold the headphones so that the left hand holds the right ear cup
and the right hand holds the left ear cup. Turn the ear cups inward
until you hear a click in both ear cup joints and the touch pad
faces toward you.
2. You hear the voice prompt “Power off” and the LED display
flashes red 3 times. The headphones switch off.
Putting the headphones on and adjusting
the headband
For good sound quality and best possible wearing comfort, the head-
band can be adjusted to properly fit your head.
▷
Wear the headphones so that the headband runs over the top of
your head. The markings
R
for the right side and
L
for the left side
can be found on the inside of the ear cup joints.
▷
Move the ear cups up and down the headband slider until:
– your ears are comfortably covered by the ear pads,
– you feel even, gentle pressure around your ears,
– a snug fit of the headband on the head is ensured.
For optimal sound quality and active noise cancellation ANC, the
ear pads must completely surround your ears.
Retrieving information on the battery
charge status
When the headphones are connected to your Bluetooth device, the
battery charge status can be displayed on the screen of your smart-
phone (depending on the device and operating system used).
The red dot displayed on the hinge of the right ear cup also indi-
cates that the headphones are switched off.
“Power off“
1
2
3x
OFF
Click
Right
R
Left
L
Right
R
Left
L