![background image](http://html1.mh-extra.com/html/sennheiser/pxc-550-ii/pxc-550-ii_instruction-manual_1240993015.webp)
Using the headphones
PXC 550-II | 15
Pairing the headphones with a Bluetooth
device
1. Switch the headphones on (> 17) and place them close to the Blue-
tooth device (max. 20 cm).
2. Press and hold the voice assistant button for 4 seconds until you
hear the voice prompt “Pairing”.
The LEDs flash white one after the other. The headphones are in
pairing mode.
3. Activate Bluetooth on your Bluetooth device.
4. Via the menu of your Bluetooth device, start the search for new
Bluetooth devices.
All active Bluetooth devices in the proximity of your Bluetooth
device are displayed.
5. From the list of found Bluetooth devices, select “PXC 550-II”. If
necessary, enter the default pin code “0000”.
If pairing was successful, you hear the voice prompts “Pairing
successful” and “Device (1) connected”. The LED flashes white 3
times.
If no connection is established within 5 minutes, pairing mode
is terminated and the headphones switch to standby mode. If
necessary, repeat the steps described above.
If you switch on the headphones for the first time (the pairing
list is empty), they automatically switch to pairing mode.
Menu
Bluetooth on
Bluetooth off
1
4
5
3
PXC 550-II
Keyword: 0000
20 cm
Menu
Add Device
Bluetooth switch
ON
3x
“Pairing“
“Pairing
successful“
“Device (1)
connected“
4s
Hold
2