LSP 500 PRO
| 41
The operating menu
Configuring the signal output to additional devices
You can send the signal of the LSP 500 PRO to one or several LSP 500 PRO – either
wired via the
LINK OUT
XLR output or wirelessly via a transmitter installed in the
SLOT 1
expansion slot. Via the
LINK OUT
output, you can also send the signal to
additonal devices (e.g. an active subwoofer).
Changing the master volume on the LSP 500 PRO does not automatically
change the master volume of a connected device (additional LSP 500 PRO,
active subwoofer, etc.). The master volume of the connected device has to
be adjusted separately.
To configure the signal output:
X
In the
SETTINGS
menu, turn the
MENU
jog dial until the
DAISY CHAIN
menu
item is displayed.
X
Press the
MENU
jog dial to open the
DAISY CHAIN
menu item.
X
Turn the
MENU
jog dial to choose between
MASTER
,
SLAVE
and
RIGHT-L
.
Option
Function
MASTER
The overall signal of the LSP 500 PRO is available as a
mono signal at the
LINK OUT
output and at the
SLOT 1
expansion slot.
X
Select
MASTER
if you want to send the overall signal
of the LSP 500 PRO to one or several LSP 500 PRO –
either wired via the
LINK OUT
XLR output or wirelessly
via a transmitter installed in the
SLOT 1
expansion
slot.
SLAVE
Only the signal of the
LINK IN
input is available at the
LINK OUT
output and at the
SLOT 1
expansion slot.
X
Select
SLAVE
if you want to daisy-chain several
LSP 500 PRO.
X
On the first LSP 500 PRO (master box), select the
MASTER
option.
RIGHT-L
Right link mode: The signal of the right channel of the
AUX IN
,
BLUETOOTH
and
USB
stereo inputs is available
at the
LINK OUT
output and at the transmitter installed
in
SLOT 1
. The box that is set to
RIGHT-L
plays the left
stereo channel and the connected box plays the right
stereo channel. The mono signals of the
SLOT 1
,
SLOT 2
,
SLOT 3
,
MIC
and
LINK IN
inputs are played on both boxes.
X
Select
RIGHT-L
if you want to use 2 LSP 500 PRO in a
stereo PA system.
X
Press the
MENU
jog dial to activate your selection.
Settings
Menu
Daisy Chain
