LSP 500 PRO
| 17
Using the LSP 500 PRO
Additional indications in the status area
The following additional icons can appear in the status area of the display panel:
Icon
Explanation
Icon is displayed steadily: Bluetooth is activated and
one device is paired.
Icon is displayed flashing: Pairing mode is activated
to allow Bluetooth devices to pair.
Icon is displayed steadily: WLAN is activated and the
LSP 500 PRO is connected to a network.
Icon is displayed flashing: WLAN is activated and a
network connection can be established.
Icon is displayed flashing: The network connection
has failed or the LSP 500 PRO is not connected to a
network.
Status of the USB player:
• Play
• Pause
• Record
Escape function
When you call up any menu item and
ESC
is displayed in the upper left corner of
the display panel, you can exit the menu item without storing the settings made.
When navigating the operating menu, the escape function also allows you to
return to the previous menu level.
X
Press the
SLOT 1
jog dial to call up the escape function and to exit a menu
without storing the settings.
X
Press the
SLOT 1
jog dial to return to the previous menu level.
Adjusting the volume
To adjust the input volume of the inputs:
X
Turn one of the six input jog dials (
SLOT 1
,
SLOT 2
,
SLOT 3
,
MIC
,
AUX IN
,
USB
).
The icon for the corresponding input is shown on the left of the volume bar.
The LEDs directly above the
SLOT 1
,
SLOT 2
,
SLOT 3
jog dials and directly
below the
MIC
,
AUX IN
,
USB
jog dials indicate the level of the corresponding
input. If an LED flickers green, a signal is present at the input. If an LED
flickers or lights up red, the signal is overmodulated. The LED of the
USB
input cannot light up red.
To adjust the overall volume.
X
Turn the
MASTER VOLUME
jog dial.
The icon for the overall volume is shown on the left of the volume bar.
You can adjust the volume from -96 to +6 dB.
