![background image](http://html.mh-extra.com/html/sennheiser/hmec-460/hmec-460_instructions-for-use-manual_1240069027.webp)
25
If a problem occurs...
Problem
Possible cause
Possible solution
No active noise
compensation
The NoiseGard
electronics are switched
off.
Set the NoiseGard ON/OFF switch to
“
ON
”.
The batteries/
rechargeable batteries
are low.
Check to see if the LED is lit yellow.
If the LED is lit red, replace the
batteries/rechargeable batteries.
The XLR-3 plug is
not connected to the
power source.
Connect the XLR-3 plug to the power
source.
The aircraft fuse is
defective.
Replace the aircraft fuse.
Summary of Contents for HMEC 460
Page 1: ...Instructions for use HMEC 460 ...
Page 2: ......