HD 280 PRO
ASSY 160518 R01, Mar 2018, 3/4
2
Replacing the connecting cable
1. Remove the earpad [010] of the left/connecting cable side as shown on page 4.
2. Remove the lower screw of the acoustic unit.
3. Remove the cap. If necessary, put a small slotted screwdriver into the two notches (see page 2)
and lift the cap.
4. Carefully unplug the connecting cable [030].
5. Replace the connecting cable and assemble in reverse order. Observe the correct cable routing
.
Ensure that the cable will not damaged by the screw dome of the cap. Also ensure that the cable´s
kink protection and the connector PCB are completely even inserted. When you put the cap on the
acoustic unit, a clicking noise is hearable. Tighten the lower screw with a torque of 18 Ncm.
!
Red (Speaker left +)
Copper (Speaker left –)
Copper (Speaker right –)
Red (Speaker right +)
Speaker right
Speaker left
Speaker right
Speaker left
Bottom side
Top side
Red (right +)
White (left +)
Black (left –)
Blue (right –)
Cable connector
Long socket side
of the kink protection
White (left +)
Red (right +)
!
4
