1
English
First Time of Using
1. Open the cover of the charging case, take out the two earphones, remove
the insulation film on them separately, and then put both earphones back
into the charging case. By this time, the left and right earphones will
automatically enter the TWS mutual pairing state. After successful mutual
pairing, the blue light in the right earphone will flash slowly and the blue light
in the left earphone will always be on, and the two earphones will enter the
pairing mode.
2. Then go to Bluetooth settings of your device, and choose SOUNDPEATS T3.
SOUNDPEATS T3
Connected
