Sennheiser ew 300 IEM, Instruction Manual

Page: 47 / 170

49
FocuS
Ltd
Stereo/FOCUS selection (EK 300 IEM)
With the EK 300 IEM you can switch between stereo and FOCUS operation.
During stereo operation (FOCUS “OFF”), the left-right signals are available
as usual (SR 300 IEM transmitter in stereo mode).
During FOCUS operation, the left-right signals are mixed and are available
as a mono signal in both headphone channels (SR 300 IEM transmitter in
stereo mode). You can, for example, set the receiver to FOCUS mode to:
•
allow an individual mix of the signals for vocals and backing music,
or
• mix two signals with different volume levels (which are then heard as
a correctly mixed mono signal).
씰
Select the “ FocuS ” menu by pressing the SET button until “ FocuS ”
appears on the display; after a short pause the current setting is
displayed.
씰 Press the button to switch the FOCUS operation on – if you press
the button, the FOCUS operation is switched off. The new setting
– i.e. “ Fo on ” or “ Fo OFF ” – starts flashing on the display.
씰
Press the SET button to return to the top menu level. The display
then switches back to the standard display.
Limiting the volume at the headphone output (EK 300 IEM)
The EK 300 IEM is equipped with a switchable limiter which limits the
volume at the headphone output. With the limiter switched on, the volume
at the headphone output will be reduced by approx. 18 dB.
씰
Select the “ Ltd ” menu by pressing the SET button until “ Ltd ” appears
on the display; after a short pause the current setting is displayed.
씰 Press the button to switch the limiter on – if you press the button,
the limiter is switched off. The new setting – i.e. “ Ltd on ” or “ Ltd OFF ”
– starts flashing on the display.
씰 Press the SET button to return to the top menu level. The display
then switches back to the standard display.