Sennheiser ew 300 IEM, Instruction Manual

Page: 41 / 170

43
6 Operation
The evolution wireless system ew 300 IEM has been factory-preset to allow
immediate use after switch-on (
“5 Preparing the devices for use”). Please
note, however, that the transmitter sensitivity is dependent on the application.
To avoid overmodulation and distortion, please first check whether the preset
sensitivity is suitable for your particular application (
“Adjusting the
sensitivity”).
Operating controls
Press the POWER button to switch the SR 300 IEM transmitter on or off.
The EK 300 IEM is switched on or off via the volume control with integral
on/off switch.
Press the SET button
– to select a menu,
– to change to the next menu,
– to change to the next segment when entering a name (SR 300 IEM only),
– to return to the top menu level.
Press the UP button
– to adjust the setting of a menu,
– to change a single character when entering a name (SR 300 IEM only).
Press the DOWN button
– to adjust the setting of a menu,
– to change a single character when entering a name (SR 300 IEM only).
POWER
SET