![background image](http://html1.mh-extra.com/html/sennheiser/evolutionwireless-ew-300-series/evolutionwireless-ew-300-series_instruction-manual_1241824058.webp)
Using the SKM 300 G4
108
Advanced > Tune menu item
•
Configuring the transmission frequency and frequency bank U
When you have configured the wireless microphone to a system bank and
you call up the
Tune
menu item, channel 1 of the frequency bank
U
is auto-
matically set. The message
U.1
briefly appears in the display. In the factory
settings, the channels of the frequency bank U are not assigned to any
transmission frequency.
While you work in the
Tune
menu, the RF signal is deactivated.
You can configure a transmission frequency for the current channel or se-
lect a channel in the frequency bank U and configure a transmission fre-
quency for this channel in the
Tune
menu. Be sure to note the information
on frequency selection, see “Setting notes”.
Only adjusting the frequency
To configure the transmission frequency for the current channel:
▷
Move the multi-function switch until the
Tune
menu item appears.
▷
Press the multi-function switch.
The frequency selection appears.
►
▷
Configure the desired frequency.
▷
Press the multi-function switch.
Your settings will be saved. You are now back in the operating menu.
Setting the channel and frequency
To select a
channel
and assign it a frequency:
▷
Move the multi-function switch until the Tune menu item appears.
▷
Hold down the multi-function switch until the frequency bank selection
appears.
►
▷
Set the desired channel.
▷
Press the multi-function switch.
The frequency selection appears.
▷
Configure the frequency.