![background image](http://html1.mh-extra.com/html/sennheiser/evolutionwireless-ew-300-series/evolutionwireless-ew-300-series_instruction-manual_1241824035.webp)
Using the EM 300-500 G4
82
▷
Press the
SYNC
button to synchronize the selected frequency with the
transmitter immediately.
Current List
▷
Select
Current List
to show the list of unused frequencies from the last
scan.
Reset
▷
Select
Reset List
to delete the list of unused frequencies.
Performing multi-channel frequency setup
As an alternative to the following procedure, multi-channel frequency
setup can also be performed using the
Sennheiser Wireless Sys-
tems Manager (WSM)
software. For more information about con-
trolling devices via the
Sennheiser Wireless Systems Manager (WSM)
software, refer to the instruction manual for the software. You can down-
load the software here:
www.sennheiser.com/wsm
To perform the automatic frequency setup for multiple radio links simulta-
neously:
▷
Connect all of the receivers to one network using a network switch. See
“Creating a data network”.
▷
Please note that all receivers must be in the same
IP address range
.
• The IP addresses can be
automatically
assigned if there is a DHCP
server in the network.
• If there is no DHCP server in the network, the IP addresses must be
assigned
manually
. See “Advanced -> IP Address menu item”.
• Assign the IP addresses for all receivers in the
192.168.x.x
range (the
link-local range
169.254.x.x
is also a possible alternative).
▷
Open the
Easy Setup
menu item on one of the receivers.
This receiver is the master. You can choose any receiver to be the mas-
ter.