Listening to audio using the headset
18
Listening to audio using the headset
You can listen to audio via a connected device. The following functions depend on the connected device.
X
Play the media on your connected Bluetooth device.
The LED on the dongle lights up blue.
x
Plays audio
Pauses audio
2x
Plays the next track in the playlist
3x
Plays the previous track in the playlist
2x
Fast-forwards the track:
X
Press and hold the button.
3x
Rewinds the track:
X
Press and hold the button.
i
If you receive and accept a call, audio playback is paused and restarts after the call – if supported by the
connected device.
ADAPT 200 series
Bluetooth
®
headset
Additional functions
19
Additional functions
Charging the headset battery
X
Connect the supplied USB cable to the USB socket of the headset and a USB socket of your computer.
USB-A
The battery is being charged.
The LED lights up depending
on the battery status of the headset and turns off when
the battery is fully charged.
LED
Battery status
100% – Battery fully charged
more than 61%
more than 21%
less than 21%
To end charging:
X
Disconnect the USB cable from the headset.
i
When the battery is flat, the headset turns off automatically.
Verifying remaining battery power
Some mobile devices indicate the battery status of the
headset.
2x
?
You can retrieve information on the remaining battery
power at any time – except while you are in a call:
X
Press the power button.
The LED flashes shortly and a voice prompt is
announced.
When the battery power drops below 21%,
the LED flashes red and “Recharge headset”
is announced several times.
LED
Remaining battery power
more than 61%
more than 21%
less than 21% – automatic voice prompt