![background image](http://html1.mh-extra.com/html/sennheiser/em-3731-ii-annexe-583/em-3731-ii-annexe-583_instruction-manual_1242734039.webp)
Adjustment tips for the operating menu
38
Multi-channel operation
Combined with Sennheiser 3000 and 5000 series transmitters, the
receivers can form transmission links that are suitable for multi-channel
operation.
Before putting the transmission links into operation, we recommend that
you perform a scan in order to find a frequency bank with a sufficient
number of free channels:
왘
Switch all transmitters off.
왘
Use a receiver to scan all frequency banks for free channels (see
“Scanning the frequency banks for interference-free channels” on
page 36).
왘
Select a frequency bank with a sufficient number of free channels (see
“Selecting a frequency bank and a channel” on page 30).
왘
Set each transmitter/receiver pair in your multi-channel system to a
different free channel within this frequency bank.
Selecting the status display
Via the “
Display
” menu, you can select the status display:
CAUTION!
Risk of reception interference!
If – within the receiver’s frequency range – transmitters
transmit on channels from different frequency banks,
reception can be subject to interference and inter-
modulation. Only the factory-preset frequencies within the
frequency banks “
1
” to “
6
” are interference and
intermodulation free.
왘
Set all transmitters of a multi-channel system to different
channels within the same frequency bank.
Display
4
can
IP-Ad
192
168
0
0
Selectable status display
Contents of the display
1.
“
Name
”
displays the freely selectable name
2.
“
Bank/Channel
”
displays the frequency bank and the
channel number
3.
“
Name/Command
”
displays the freely selectable name
and the command display
(EM 3732-II COM receiver only)
4.
“
Bank/Channel/Command
”
displays the frequency bank, the channel
number and the command display
(EM 3732-II COM receiver only)
M
H
z
776.000
NAME
M
H
z
776.000
BANK
CH
01.01
M
H
z
776.000
NAME
COM
AF
M
H
z
800.450
BANK
CH
03.03
COM
AF