Sennheiser EM 3731-II - ANNEXE 583, Instruction Manual

Page: 34 / 50

33
Adjustment tips for the operating menu
왘
Change to the setting mode of the “ Booster ” menu.
The current setting starts flashing.
왘
Turn the jog dial
7
to change the setting to “ Booster Feed On ” or
“ Booster Feed Off ”.
왘
Press the save button
8
.
The selected setting is stored. When the booster supply voltage is
switched on, the two LEDs
N
and
S
light up. The display changes to
the selection mode of the operating menu.
Adjusting the audio output level
Via the “ AF Out ” menu, you can adjust the maximum output level of the
audio outputs (AF Out and Command).
With the EM 3732-II COM twin receiver, the audio level of the Command
output 1
L
corresponds to the level of the audio output 1
M
and the
audio level of the Command output 2
J
corresponds to the level of the
audio output 2
K
.
The following figures are a guide to the best settings:
• Line level: +5 to +18 dB
• Microphone level: –10 to +4 dB
To obtain the best signal-to-noise ration, adjust the respective maximum
audio level to the settings shown above.
왘
Change to the setting mode of the “ AF Out ” menu.
The current setting starts flashing.
왘
Turn the jog dial
7
to adjust the audio output level.
The display shows the selected audio output level.
왘
Press the save button
8
.
The selected setting is stored. The display changes to the selection
mode of the operating menu.
Booster Feed On
esc
s ave
syn c
digital audio
processing
syn c
DEV
M
H
z
777.005
U.01 BANK
CH
COM AF
8 7
AF Out
+12
ooster Clock
48
+12
+12 dB
esc
s ave
syn c
digital audio
processing
syn c
DEV
M
H
z
777.005
U.01 BANK
CH
COM AF
8 7