background image

Using the receiver

14

Deactivating the lock mode temporarily

You can activate or deactivate the automatic lock mode via the “

Auto Lock

” menu item. If the

lock mode is activated, you have to temporarily deactivate it In order to be able to operate
the receiver:

The lock mode icon

 flashes prior to the lock mode being activated again.

Muting the audio signal

To 

mute

 the audio signal:

To 

unmute

 the audio signal:

Press the 

SET 

button.

Locked

” appears on the display panel.

Press the 

UP

/

DOWN 

button.

Unlock?

” appears on the display panel.

Press the 

SET 

button.

The lock mode is temporarily deactivated:

SET

SET

When you are in the operating menu

The lock mode is deactivated as long as you are in the operating menu.

When one of the standard displays is shown

The lock mode is automatically activated after 10 seconds.

When one of the standard displays is shown on the display panel, press the

STANDBY 

button.

RX Mute On?

” appears on the display panel.

Press the 

SET 

button.

The audio signal is muted.

Press the 

STANDBY 

button.

RX Mute Off?

” appears on the display panel.

Press the 

SET

 button. 

The muting is canceled.

533.875

ew100 G3

  20.12

 MHz

P

PEAK

-10

0

40

25

10

-20

-30

AF

RF

SET

SET

Summary of Contents for EM 100 G3































Reviews: