![background image](http://html1.mh-extra.com/html/sennheiser/eki-830/eki-830_instruction-manual_1242697008.webp)
6 |
EKI 830
Putting the EKI 830 into operation
Putting the EKI 830 into operation
Removing and charging the rechargeable battery
You can charge the receivers and the removed rechargeable batteries
in the Sennheiser L 300 10-10 charger. An individual receiver can be
charged in the Sennheiser TI 830 infra-red transmitter.
왘
Before using the rechargeable batteries for the first time,
charge them for
at least 3 hours.
Charging the receiver
왘
Place the receiver into the charging compartment of the L 300 10-10
charger or into the transmitter’s charging compartment.
The receiver automatically switches off. The charging process is
started automatically. The corresponding LED lights up red.
왘
Charge the rechargeable batteries until they are fully charged. The
corresponding LED lights up green.
For further information on charging, refer to the instruction manual of
the L 300 10-10 or to the instruction manual of the corresponding
Sennheiser infra-red hearing system.
Charging the rechargeable battery separately
When a rechargeable battery is discharged, you can use the receiver
with an optional spare rechargeable battery:
왘
Remove the discharged battery from the receiver and recharge the
battery in the L 300 10-10 charger or in the Sennheiser infra-red
transmitter.
To remove the receiver’s discharged battery:
왘
Pull the battery out of the receiver’s battery
compartment.
To insert the receiver’s battery:
왘
Insert the battery into the receiver and slide
the battery into the battery compartment as
far as it will go.
• With a fully charged rechargeable battery, the
operating time
is up to 12 hours
.
• Always store the receiver in the L 300 10-10 charger to ensure
that it is fully charged when needed. The intelligent battery
charging technology prevents overcharging.
3h
EKI830.book Seite 6 Donnerstag, 10. Mai 2012 2:02 14