![background image](http://html.mh-extra.com/html/sennheiser/cx-120-bt/cx-120-bt_instruction-manual_1240204014.webp)
Using the headphones
14 | CX 120BT
▷
Press the multi-function button for 2 seconds.
The headphones switch on. You hear the voice prompt “Power on”
and the LED display flashes blue 3x.
If a paired Bluetooth device is within the transmission range, you
hear the voice prompt “Device (1) connected”. The LED flashes
blue 3x.
Switching the headphones off
▷
Press the multi-function button for 4 seconds.
You hear the voice prompt “Power off” and the LED flashes red 3x.
Retrieving information on the battery
charge status
You can check the remaining play and talk time when the head-
phones are in idle mode, are not actively playing music, or are not
used for making calls.
▷
Press the volume
-
button/track -.
Make sure that Bluetooth is already activated on your Blue-
tooth device when switching on the headphones.
If Bluetooth is activated and the headphones cannot find a
paired Bluetooth device within a few minutes, you hear the
voice prompt “Lost connection”. The LED flashes red. The
headphones switch to standby mode.
The headphones automatically switch to idle mode if no paired
Bluetooth device can be found within 5 minutes. You can wake
up the headphones from idle mode by pressing the multi-func-
tion button for approx. 3 seconds.
“Power off“
3x
4s
Hold
OFF
Voice prompt
Meaning
“Recharge headset”
The rechargeable battery is empty.
Recharge the rechargeable battery (
>
9).
In addition, the LED flashes red.
“Below 1 hour play time”
Battery is less than 10% charged. In
addition, the LED flashes red.
“Between 1 and 2 hours
play time”
Battery is less than 20% charged. In
addition, the LED lights up red.