![background image](http://html.mh-extra.com/html/sennheiser/cx-120-bt/cx-120-bt_instruction-manual_1240204006.webp)
Product overview
6 | CX 120BT
During phone calls
Notes on voice prompts
The headphones output voice prompts for the following functions.
Using the Smart Control app, you can change the language of the
voice prompts, choose between voice prompts and beep sounds, or
deactivate the status messages with a few exceptions (e.g.
rechargeable battery is empty).
LED
Meaning; the headphones
lights up red
are being charged
lights up blue
are fully charged
flashes blue
are switched on
flashes red-blue
are in Bluetooth pairing mode
flashes blue
Bluetooth pairing successful
flashes red
Bluetooth pairing failed
flashes blue
are connected to a device via Blue-
tooth
flashes red
are switched off
LED
Meaning
flashes purple
Incoming call
flashes red
Incoming call and the rechargeable
battery of the headphones is almost
empty
If the LED does not light up immediately during charging, clean
the charging contacts and charge the headphones until the
LED lights up again (
>
9).
Voice prompt
Meaning/headphones
“Power on”
are switched on
“Power off”
are switched off
“Device (1) (2) connected”
are connected to device 1 or 2
“Lost connection”
are not connected via Bluetooth
“Pairing”
are in Bluetooth pairing mode
“Pairing successful”
Bluetooth pairing successful
“Pairing failed”
Bluetooth pairing failed
“Call rejected”
incoming call rejected
“Call ended”
call ended
“Redialing”
redials the last dialed number
“Voice dialing”
Voice dialing is activated