4
To set the configuration switches, remove the
back panel, which is secured by two screws.
Then slide the cover back to expose the
switches.
The switches can be changed while the code
translator is powered up and the new settings
will take effect immediately.
SW1-8
PELCO CODE TYPE
ON: "P" CODE
OFF: "D" CODE
Set to match the type of code from
the Pelco control system
When setting up Pelco com ports to
work with a code translator, configure
the port the same as it would be for a
Pelco dome.
SW1-7
"P" CODE BAUD RATE
ON: 9600 BAUD
OFF: 4800 BAUD
This switch is ignored if SW1-7 is OFF.
SW1-5
JAVELIN CODE TYPE
ON: JO208
OFF: JO308
SETTING THE SWITCHES
CONFIGURATION
SWITCH
U11
U10
U9
U8
U13
U6
U3
U4
CN7
CN6
CN5
CN4
CN2
CN1
U2
U1
SW1
SENNETECH
55-9702
1 2 3 4 5 6 7 8
ON
OFF
